Ecograph T, RSG35
Diagnostics and troubleshooting
Hauser
55
The diagnosis list is designed as a ring memory, i.e. when the memory is full the oldest
messages are automatically overwritten (no message).
The following information is saved:
• Error number
• Error text
• Date/time
11.6 Event logbook
Events such as limit value violations and power failures are displayed in chronological
order in the event logbook. It can be found in the main menu under
"Diagnostics -> Event
logbook"
. Individual events can be selected and details displayed.
11.7 Device information
Important device information, e.g. serial number, firmware version, device name, device
options, memory information, SSL certificates etc. are displayed in the main menu under
"Diagnostics -> Device information"
.
For further information open the online help on the device.
11.8 Diagnostics of measured values
Displays the current measured values in the main menu under
"Diagnostics -> Measured
values"
. The input signals can be verified here by displaying the scaled and calculated
values. To verify calculations, call up calculated auxiliary variables if necessary.
11.9 Diagnostics of outputs
Displays the current states of the outputs (relays 1-6) in the main menu under
"Diagnostics -> Outputs"
.
11.10 Simulation
Various functions/signals can be simulated for test purposes here.
NOTICE
Selecting simulation: Simulation of the relays can be found in the main menu under
"Diagnostics -> Simulation". The simulation of the measured values can be found in
the main menu under "Expert -> Diagnostics -> Simulation".
Only the simulated values are recorded during simulation. The simulation is recorded in
the event logbook.
‣
Do not start simulation if measured value recording must not be interrupted!
11.10.1 E-mail test
A test mail can be sent to the selected recipient in the main menu under
"Diagnostics ->
Simulation -> E-mail"
.
At least one e-mail address must be set beforehand. A message is provided on the
device to confirm if the email was sent or not.
