Endress+Hauser Ecograph RSG35 Operating Instructions Manual Download

Page: 86 / 174

Appendix

Ecograph T, RSG35

Hauser

Navigation

Expert → System → Date/time setup → NT/ST changeover → Day

Direct access code: 110012-000

Description

Day, when in the autumn a change from summer to normal time occurs.

Visible for NT/ST changeover = Automatic or Manual. Only editable if NT/ST changeover =

Manual.

Options

Sunday, Monday, Tuesday, Wednesday, Thursday, Friday, Saturday

Factory setting

Sunday

Month

Navigation

Expert → System → Date/time setup → NT/ST changeover → Month

Direct access code: 110013-000

Description

Month, when in the autumn a change from summer to normal time occurs.

Visible for NT/ST changeover = Automatic or Manual. Only editable if NT/ST changeover =

Manual.

Options

January, February, March, April, May, June, July, August, September, October, November,

December

Factory setting

October

Date

Navigation

Expert → System → Date/time setup → NT/ST changeover → Date

Direct access code: 110014-000

Description

Date next autumn when summer time changes back to normal time.

Only visible if NT/ST changeover = Automatic or Manual. Cannot be edited.

Time

Navigation

Expert → System →Date/time setup → NT/ST changeover → Time

Direct access code: 110015-000

Description

Point of time when the time is moved back by 1 hour on the day of the changeover from

summer time to normal time (in the set time format).

Visible for NT/ST changeover = Automatic or Manual. Only editable if NT/ST changeover =

Manual.

User entry

Time in set time format

Factory setting

02:00

Summary of Contents for Ecograph RSG35















































































































































































Search results

Summary of Contents for Ecograph RSG35

Reviews:

Related manuals for Ecograph RSG35

Brands by name

Popular brands

Endress+Hauser Ecograph RSG35, Operating Instructions Manual

Search results

Summary of Contents for Ecograph RSG35

Reviews:

Related manuals for Ecograph RSG35

Brands by name

Popular brands