Installation
Ecograph T, RSG35
12
Hauser
144 (5.67)
144 (5.67)
141 (5.55)
17 (0.67)
34
(1.34)
X
Y
A0019301
2
Panel mounting and dimensions in mm (Inch)
1. Push the device through the panel cutout from the front. To avoid heat buildup,
maintain a distance of > 15 mm (>0.59 in) from walls and other devices.
2. Hold the device level and hang the fastening clips in the openings (1 x left, 1 x right).
3. Evenly tighten the screws on the fasting clip using a screwdriver to guarantee a
secure seal to the control panel (torque 100 Ncm).
5.3
Post-mounting check
• Is the sealing ring undamaged?
• Does the seal run all around the housing collar?
• Are the threaded rods properly tightened?
• Is the device fixed firmly in the center of the control panel cutout?
