Endress+Hauser Ecograph RSG35, Operating Instructions Manual

Page: 112 / 174

Appendix Ecograph T, RSG35
112 Hauser
Description Stores a message in the event log when a fault occurs.
Options No, Yes
Factory setting No
Copy settings
Navigation Expert → Inputs → Universal inputs → Universal input x → → Copy settings
Direct access code: 220200-0xx
Examples: Universal input 1: 220200-000; Universal input 12: 220200-011
Description Copies settings from actual channel to selected channel.
Options Switched off, Universal input x
Users can choose from all the available universal inputs.
Factory setting Switched off
Submenu "Digital inputs -> Digital input x"
Navigation Expert → Inputs → Digital inputs → Digital input x
Description Setting up only required if the digital inputs (e.g. events) are to be used.
x = place holder for selected digital input.
Add input
Navigation Expert → System → Digital inputs → Add input
Direct access code: 252000/000
Description Addition of a digital input that must be configured according to the function.
Options No, Digital input x
Factory setting No
Delete input
Navigation Expert → System → Digital inputs → Delete input
Direct access code: 252001/000
Description Delete an input configuration.