Emerson Tescom ER5000 Series, User Manual, Page: 165 / 248

ER5000 —
165
The ERTune™ Program: Basic Features
The Commands in the Profile Builder
IMPORTANT! IMPORTANT!
The unit of measurement for the setpoint value parameter
in these commands matches the unit of measurement for feedback set
during Step 7 of the
Setup Process or when you followed the steps To
change the range of feedback values tracked by the ERTune™ program .
Step
Initiates a step setpoint change to the value entered in the
Setpoint
to Step to
entry field.
Ramp
Initiates a ramp setpoint change to the value entered in the
Setpoint
to Ramp to
entry field. The duration, in seconds, of the ramp-up or
ramp-down is set in the
Time to Ramp (sec)
entry field.
Dwell
Maintains the current setpoint for the amount of time, in seconds,
entered in the
Time to Dwell (sec)
entry field.
Loop
Allows the Profile to loop multiple times through a sequence of
command segments, beginning with the segment entered in the
Loop to Segment
entry field.
NOTE NOTE
CAUTION CAUTION
WARNING WARNING
The command sequence will run the number of times entered in
the
Number of Loops
entry field. A value of 0 in the
Number of Loops
entry
field will cause the loop to run perpetually.