Emerson Rosemount CT5100, Reference Manual

Page: 61 / 179

Table 5-3: Fuse Requirements
(continued)
Fuse Function Rating Schurter part number
2 Neutral line 110/230
Vac (following mains
filter) 3.15 A, 250 V, fast
acting ceramic 0001.1009
3 Analyzer 12 Vdc supply
rail 5 A, 250 V, fast acting
ceramic 0001.1011
4 Analyzer 24 Vdc supply
rail 3.15 A, 250 V, fast
acting ceramic 0001.9011
5.4.3 Connecting the sample supply and return line
Sample gas supply and sample return connections are ¼ -in. (6 mm) ”Hamlet”
compression tube fittings. To avoid the risk of gas leaks, confirm that these connections
are made correctly and tightly. Both the sample gas supply pipe and the sample return
pipe should be thermal insulated.
The maximum sample gas supply pressure is 2 BarG.
5.4.4 Connecting the signal cables
The signal cables are connected to the system through an entry point outlet C, as shown in
Figure 3-4 . All signal cables are to be minimum 20 AWG tri-rated switchgear cable.
Customer supplied conduit and cables are to be terminated in the entry point provided in
accordance with local electrical codes.
Reference Manual Install
00809-0100-4512 October 2019
Reference Manual 61