Emerson Rosemount CT5100, Reference Manual

Page: 82 / 179

Figure 7-5: Display Controller
CAUTION
DO NOT, under any circumstances, press the top two buttons on the display controller
simultaneously. This will override the system code supplied with the analyzer and display
the default program screen for the controller.
This will lock the software controlling the analyzer requiring the analyzer to shut down
externally and restarted risking a possible corruption of the software and loss of the
analyzer operation during the shutdown and restart process.
It is essential that only trained, qualified personnel operate the controls on the analyzer.
Failure to follow these instructions may cause warranty invalidation, property damage
and/or personal injury or death.
Figure 7-6: Default Program Screen
The purge control panel ( Figure 7-7 ) is used to program the operation of the overpressure
air system that prevents flammable and explosive gases from entering the electrical
compartment of the analyzer. Adjustment of the overpressure air system must only be
performed by maintenance personnel.
Start-up procedure Reference Manual
October 2019 00809-0100-4512
82 Rosemount CT5100(Ex)