manualshive.com logo in svg

Emerson Rosemount 3490 Series, Reference Manual

Share
Download
Emerson Rosemount 3490 Series Reference Manual Download Page 143

Table 5-1: Control Unit Readings

 (continued)

Category

Parameter

Description

MENU

Relay

D811

RL1 Ops

This indicates the number of operations carried
out by relay RL1. It can be re-set to zero by
pressing the 

red (enter)

 button when displaying

D811.
The operation count is used by the Relay
Operations Alarm feature (see 

Relay safeguard

options

).

RELAY

 

→

 

RELAY

OPERATIONS

D812 to D815

D812 to D815 are the operation counters for
other relays.

RELAY

 

→

 

RELAY

OPERATIONS

D820

Relay Status

This indicates a series of 0 and 1 digits which
represent the de-energized (0) or energized (1)
relays.
The first digit represents Relay RL1, the second
digit represents Relay RL2, etc.

RELAY

 

→

 

Relay Status

D821

RL1 Run-Time

This indicates the total time that relay RL1 has
been energized for the present relay operation. It
is cumulative i.e. does not reset when the relay
RL1 is de-energized.
The run-time is used by the Relay Run Time Alarm
feature. (see 

Relay operations alarm

).

RELAY

 

→

 

RELAY RUN

TIME

D822 to D825

D822 to D825 are the running times for the other
relays.

Totalizer
(Rosemount
3491 only)

D828

Totalizer

This indicates the totalizer count.
See 

Set-up totalizing on the Rosemount 3491

 for

details of the totalizing feature on the 3491.

Totalizer

Totalizer
(Rosemount
3492 and 3493
only)

D828

Totalizer 1

This indicates the Totalizer 1 count.
See 

Set-up totalizing on the Rosemount 3492

 for

details of the totalizing feature on the Rosemount
3492.
See 

Set-up totalizing on the Rosemount 3493

 for

details of the totalizing feature on the Rosemount
3493.

TotalizerTotalizer

D829

Totalizer 2

This displays the Totalizer 2 count.
See 

Set-up totalizing on the Rosemount 3492

 for

details of the totalizing feature on the 3492.
See 

Set-up totalizing on the Rosemount 3493

 for

details of the totalizing feature on the 3493.

Alarm report

D830

Alarm report

This is for viewing live alarms.
The highest priority alarm is listed first. Use the

up/down arrow

 buttons to scroll through the list

if more than one alarm exists. If there are no live
alarms, the alarm report indicates “none”.
See 

Table 4-22

 for a summary of other alarm

reporting features.

Alarm report

Reference Manual

Service and troubleshooting

00809-0100-4841

January 2021

Emerson.com/Rosemount

143

Summary of Contents for Rosemount 3490 Series































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands