Emerson Machinery Health Expert CSI 2600, User Manual

Page: 59 / 110

5.7.3 Configure access to a CSI Machinery Health Monitor
from a computer
Use a terminal emulator such as Telnet or HyperTerminal to connect to the CSI Machinery
Health Monitor using a serial cable or an ethernet cable.
(1)
Configure the settings in
Table 5-6 in the terminal emulator's connection settings.
Prerequisites
You need a username and password to log on to a CSI Machinery Health Monitor with
Telnet.
Serial connection setup Table 5-6:
Setting Value
serial port COM1
baud rate 9600
data bits 8
stop bit 1
parity none
flow control none
5.7.4 Boot parameters
Boot parameters Table 5-7:
Boot parameter Description
boot device
The device name of the system.
• shend0 (CSI 6500 and DCMII systems)
• cs (DCMI systems)
processor number 0
host name
The username for the FTP user.
file name
The path and filename of the firmware installed in the FTP site root
directory (C:\inetpub\ftproot, by default).
bin/6500
is the firmware for a CSI 6500.
bin/6500T
is the firmware for a CSI 6500T.
inet on ethernet (e) IP Address and Subnet in Hex:
192.168.0.10:ffffff00
inet on backplane (b)
Intentionally blank.
host inet (h) The IP address of the FTP server.
Example: 192.168.0.1
(1) Telnet and HyperTerminal are Windows Features that are available but are not enabled by default. You can use other terminal emulator
programs.
Software configuration
MHM-97453, Rev 1 55