Online Configuration—External Network Folder Specifications
Figure 3-3:
External Network Folder Specifications dialog fields
Table 3-1:
Field
Values
Explanation
UNC Path
(variable)
Specifies the to the NAS drive folder where the unit
should stream transient data.
Allowed Drive Space
1–250 GB
Specifies the limit for transient data on the NAS
drive. The data will begin to FIFO when it reaches
this limit.
Use Drive Space As
Primary
Indicates that the NAS drive is to be used as the
primary streaming location (replacing the internal
hard drive.
Failover
Indicates that the NAS drive is to be used as a fail-
safe location in the event that the internal hard
drive fails.
Credentials
Username and Password
Specifies the username and password that will
access the NAS drive folder named in UNC Path.
Example: Storage
If a 250 GB NAS drive is storing data from 24 transient channels, then it can store
approximately 260 hours of data before it begins to overwrite the oldest measurements. If
only 12 channels are streaming data, about 520 hours can be stored.
3.8
Network configuration
IP addresses are unique addresses that systems on a network use to communicate with
each other.
Getting started
14
MHM-97453, Rev 1
Summary of Contents for Machinery Health Expert CSI 2600
