Menu 9
122
Commander SK Advanced User Guide
www.controltechniques.com Issue Number: 9
Setting this parameter and Pr
to a On(1) causes the input sense of the logic functions to be inverted.
Setting this parameter and Pr
to On(1) causes the output sense from the logic functions to be inverted.
If the delay parameter is positive, the delay ensures that the output does not become active until an active condition has been present at the input for
the delay time as shown below.
If the delay parameter is negative, the delay holds the output active for the delay period after the active condition has been removed as shown below.
Therefore an active input that lasts for as long as the sample time or more will produce an output that lasts at least as long as the delay time.
This destination parameter and Pr
define the parameters to be controlled by the logic function. Only non-protected parameters can be
programmed as a destination. If a invalid parameter is programmed, the output is not routed anywhere.
9.07
Logic function 1 source 2 invert
Coding
Bit
SP
FI
DE Txt VM DP ND RA NC NV
PT
US RW BU PS
1
1
1
Range
OFF(0) or On(1)
Default
OFF(0)
Update rate
21 ms
9.08
Logic function 1 output invert
Coding
Bit
SP
FI
DE Txt VM DP ND RA NC NV
PT
US RW BU PS
1
1
1
Range
OFF(0) or On(1)
Default
OFF(0)
Update rate
21 ms
9.09
Logic function 1 delay
Coding
Bit
SP
FI
DE Txt VM DP ND RA NC NV
PT
US RW BU PS
1
1
1
Range
±25.0 s
Default
0.0
Update rate
21 ms
9.10
Logic function 1 destination
Coding
Bit
SP
FI
DE Txt VM DP ND RA NC NV
PT
US RW BU PS
2
1
1
1
1
Range
Pr
0.00
to Pr
21.51
Default
Pr
0.00
Update rate
Read on drive reset
9.11 to 9.13
Unused parameters
Delay
Input
Output
Delay
Input
Output
Summary of Contents for 2202
Page 199: ......
Page 200: ...0472 0001 09 ...
