Embraer EMB-505 Phenom, Service Manual

Page: 121 / 224

GROUND HANDLING AND
SERVICING HANDBOOK
EFFECTIVITY: ALL 12-23-00-100-802-A/300
Page 313
NOV 20/09
Copyright © by EMBRAER S.A - All rights reserved - See title page for details.
H
A
R
D
C
O
P
Y
I
S
U
N
C
O
N
TR
O
L
L
E
D
.
O
N
C
E
P
R
IN
TE
D
,
T
H
IS
P
A
G
E
M
U
S
T
N
O
T
B
E
R
E
T
A
IN
E
D
FO
R
F
U
TU
R
E
R
E
F
E
R
E
N
C
E
.
B
E
FO
R
E
U
S
IN
G
,
M
A
K
E
S
U
R
E
TH
IS
H
A
R
D
C
O
P
Y
I
S
T
H
E
L
A
TE
S
T
IS
S
U
E
.
(b) Apply the solution with a spray bottle, soft-bristle brush, sponge or cot-
ton cloth.
(c) Spray the solution on the surface. Rub the surface with a clean cloth or
sponge. Do not permit excess to run off to adjacent surfaces. Make
sure that no excess comes into contact with porous surfaces.
(d) Rub the dirty area as necessary and repeat the application of the solu-
tion to remove contamination
(e) Rinse the surface with a fresh sponge or a cloth dampened with clean
water to remove residue.
(f) Dry the surface with a clean, dry cotton cloth.
(3) Use of CALLA 301-A LEMON:
NOTE: Cool water works better with normal dirt and dust. Warm water
works best with oily surfaces.
(a) Prepare a solution of CALLA 301-A LEMON with cool or lukewarm
water between 32 °C - 49 °C (90 °F - 120 °F). Prepare a solution with 1
part of CALLA 301-A LEMON to 4-8 parts of water by volume for nor-
mal cleaning. For concentrated dirt or spots, use full strength.
(b) Apply the solution with a spray bottle, soft-bristle brush, or cotton cloth.
(c) Spray the solution on the surface. Rub the surface with a clean cloth or
sponge. Do not permit excess to run off to adjacent surfaces. Make
sure that no excess comes into contact with porous surfaces.
(d) Rub the dirty area as necessary and repeat the application of the solu-
tion to remove contamination.
(e) Rinse the surface with a fresh sponge or a cloth dampened with clean
water to remove residue.
(f) Dry the surface with a clean, dry cotton cloth.
I. Ultrasuede - Cleaning
(1) Do the regular maintenance as follows:
(a) Vacuum the carpet to remove all loose particles.
(b) To prepare the Ultrasuede cleaning-solution refer to the manufac-
turer's instructions.
NOTE: You can remove stains with detergent. Use denatured
alcohol or a mild cleaning fluid when required. Refer to
Table 302.
(c) Apply it to the surface while you use a medium-bristle brush lightly.
(d) Let the cleaned area dry.
(e) Vacuum it to complete the cleaning.
(2) Clean the everyday stains as follows:
(a) Lightly use a spatula and a wiper to clean the area.
(b) Prepare a solution of water and mild detergent.
NOTE: You can remove stains with detergent. Use denatured