Elster A1120 User Manual Download Page 102

Page: 102 / 157

Power Master Unit

_________________________________________________________________

Techniques used on the action windows

Selecting Objects or folders

Point at the object or folder and click the left most mouse button.

The object or folder will appear highlighted.

Opening folders

In the Scheme Manager, double click the leftmost mouse
button on Schemes. The folder will open to show further
folders.

Dragging and dropping objects or folders

Valid objects or folders can be moved from the
Meter manager or Scheme manager to the
Meter list using drag and drop techniques.

Meter Manager

Meters

B9918293
B9618294

B9918293

Meter List

Drag &

Drop

Use of the rightmost mouse button

Point to an object in the Scheme manager and click the rightmost
mouse button. A menu appears.

1.5 The

Main

Window

This section provides an overview of the Master Unit
Software. The use of the components of the Window
is detailed in the section, Features of the Main Master
Unit.

Summary of Contents for A1120






























































































































































Search results

Summary of Contents for A1120

Reviews:

Related manuals for A1120

Brands by name

Popular brands

Elster A1120, User Manual

Search results

Summary of Contents for A1120

Reviews:

Related manuals for A1120

Brands by name

Popular brands