(((ELKRON))) - MP110
6.4 Remote Connection
Via Modem
•
ATTENTION
Before making any connection, make sure that the serial connection
port between the modem and the PC and the modem’s control string
are those set in the configuration menu.
•
After connecting the PC’s serial port with the one present on the
modem, select from the System File page which one of the two
telephone numbers to call and click on “Call”.
System telephone
System telephone
The message “CALL IN PROGRESS … PRESS ESC TO INTER-
RUPT” is displayed on the bottom window on screen. Simply press the
Esc
key to interrupt the call.
•
The message “CONNECTED TO SYSTEM” is displayed if the connec-
tion has taken place; press the Close pushbutton to terminate the
connection.
•
It is also possible to enable the answering machine skipping function
if an answering machine or fax is connected to the number called and
the user wishes to EXCLUDE it.
•
Click on the
Skip Answering Machine
box and select the number of
seconds of stand-by between the line’s dropping, after the first two or
three rings, and the actual connection. In this case, the modem dials
the number selected, hears two or three rings and ends the commu-
nication; it stands by for the number of seconds selected for stand-by
and re-dials the number. The unit is connected after the first ring.
If the transmitted codes do not correspond to the unit’s codes, the
modem terminates communication and sends the message:
INCORRECT CODE
ATTENTION
The unit terminates communication after 15’ of connection with the
message: TIMEOUT 15’.
System telephone
System telephone
65
