(((ELKRON))) - MP110
MAINS/BATTERY
5.13 Event log
•
The storage of 64 events is available. The events are stored in a non-volatile memory (EEprom); therefore they are
kept also in case of no power.
•
Every event shows the stored system status at the moment of the occurrence of the event.
•
Access through: ENGINEER code /MASTER USER code +
F
+
A
.
•
Use keys
1
and
2
for forward and backward consultation. Key
1
allows to scroll the events starting
from the latest one to the last in time terms, viceversa with key
2
.
•
For every visualized event,the buzzer of the keypad being used generates a double beep.
•
When the last event (through
1
) or the latest event (through
2
), the buzzer generates a long beep.
•
If during the consultation a quick access to the latest event is required, press keys
F
+
A
in sequence.
•
To cancel all stored events, press key
E
during consultation (CANCELLATION IS ALLOWED TO THE
ENGINEER ONLY).
5.13.1 Keypad led status during event consultation
Sector leds S1,S2,S3 show the status of the system at the occurrence of the event being visualized:
LED on= armed sector
LED off= disarmed sector
Similarly the line led will be:
OFF in case of mains lack.
ON in case of mains presence.
FLASHING in case of battery low.
The ALL led will be on in case of burglary alarm event.
The MAN led will be on in case of tamper alarm event.
The OI led will be on in case of zone tamper alarm event (sensor tamper).
The ZO led will be always off.
TOTAL
TEST
ZONE
TEL
EXIT
SIREN
1
2
3
A
1
2
4
5
7
3
6
9
F
0
8
C
S
O
E
**
3
2
1 3
KP100D
+
-
S1 S2 S3 LIN ALL MAN OI
ZO
LED STATUS
sector status
mains/battery
status
EVENT
LED STATUS
ALL MAN
OI
ALL
MAN
PAN
TEC
FIR
TAMPER SENS.
ON
OFF
ON
ON
ON
OFF
OFF
ON
OFF
OFF
OFF
ON
type of event
OFF
OFF
OFF
OFF
OFF
OFF
ON
ALL
OI
MAN
ZO
S1
S2
S3
NB: The sector status and the line status indicate the system status
at the moment of the visualized event.
PROCEDURE ACCESS
COD.
1/3
F
A
57
