manualshive.com logo in svg

ElektroPhysik MiniTest 725, Technical Manual And Operating Instructions, Page: 58 / 85

Share
Download
ElektroPhysik MiniTest 725 Technical Manual And Operating Instructions Download Page 58

13.  

© ElektroPhysik 

MiniTest 725, MiniTest 735, MiniTest 745 

58 / 85 

 

10.2 Data transmission to a PC (terminal program) 

Readings  and  statistics  of  a  batch  can  be  transferred  to  a  PC  software  (terminal  program  for 
example  MSoft  7000)  using  the  USB  cable  interface  or  alternatively  the  wireless  bluetooth 
interface. 
Data transmission using the wireless bluetooth interface requires pairing of the bluetooth interface 
with  the  bluetooth  interface  of  the  Windows  operating  system.  The  MSoft  7000  program  must 
equally be set to the MSoft7000 program.  

 

 

 

Enter the statistics menu by pressing the function key „STAT“. Select 
the  submenu  „Print“  using  the  arrow  keys  „

“  or  „

“  and  validate  by 

pressing the „OK button. 

 

 

 

 

The submenu „Printing“ offers the following options for data transfer to a 
terminal program: 
 
 

- 

„All“ : Readings as well as statistical values are transferred 

- 

„Statistics“ : only statistical values are transferred 

- 

„Readings“ : only single readings are transferred 
 

Select  an  option  using  the  arrow  keys  „

“  or  „

“    and  validate  by 

pressing the „OK“ button. 

 

 

 
After activation of the print function, the message „Connecting…“ is displayed. If no PC connection 
was or can be established, the message: „Warning: No printer / PC found“ is displayed.  Data 
transmission is signaled by the display message „Data transfer“.  
If the error message „Data transmission error“ is displayed: 
 

- 

Check the configuration of the PC.  

Hinweis:

 

After activation of the print function, the message „Data transfer..“ is displayed. If no PC connection 
was or can be established, the message: „Transmission error“ is displayed. Data transmission is 
signaled by the display message „Data transfer“.  
 
If the error message „Data transmission error“ is displayed: 
 

- 

Check the configuration of the printer.  

 

10.3 Data transmission to a PC (MSoft 7) 

Data transmission is performed interactively via the „MSoft 7“ software using either the Bluetooth 
interface or the USB cable.  
Data transmission using the wireless bluetooth interface requires pairing of the bluetooth interface 
with  the  bluetooth  interface  of  the  Windows  operating  system.  Depending  on  the  interface,  the 
Msoft program must be set or the automatic regcognition of interfaces must be activated.  

Summary of Contents for MiniTest 725






















































































Reviews:

No comments