13.
© ElektroPhysik
MiniTest 725, MiniTest 735, MiniTest 745
50 / 85
Use arrow up/down keys to scroll through the batch. The readings are
serially numbered (first figure on the left) and displayed along with the
block number (second figure after the slash) and the measuring
principle used for taking the reading.
If you have set tolerance limits, readings off tolerance will be marked
accordingly (> above limit; < below limit).
Readings that have been deleted will be marked by an “X”. Deleted
readings will not be included in the print-out, neither will they be
transferred or used for statistics calculation.
Block statistics cannot be shown until a block has been completed.
8.3 Statistical values / Print-out and data transfer to a PC
All models of the MiniTest 700 series are equipped with an infrared port (IrDA 1.0). Readings and
statistics of a batch can be transferred to a PC or printed out on the MiniPrint 7000 data printer.
Press function key STAT to call the statistics menu.
Use arrow up/down keys to select “Print”.
Press OK to confirm.
In the Print menu you have the following options to specify the range of
data to be transferred to a PC or to be printed-out:
-
„All“ : statistics and readings
-
„Statistics“ : statistical values only
-
„Readings“ : single readings only
Use arrow up/down keys to make your selection.
Press OK to confirm.
After the printing function has been activated, the message „Connecting ...“ appears.
Once the data transfer is in progress, the message “Transmitting data…” appears.