© ElektroPhysik
MiniTest 725, MiniTest 735, MiniTest 745
46 / 85
7.2.5 Parameter Overview
Press function key MENU and select “Database”. Press OK to confirm.
Use up/down arrow keys to select the requested batch. Press OK to
confirm. Use arrow up/down keys to select “overview” and press OK to
confirm.
Display will show the parameter settings of the active batch.
Parameters – List of symbols and their meanings
Sensor type (FN 1.5, F 1.5, N07, FN5 , F5, N2,5, F2, F15)
Measuring principle („Auto (Auto-F/N), „Fe (Ferrous)“, N-Fe (Non-
Ferrous))
Measuring mode „Single reading”
Measuring mode „Scan mode”
Calibration method „Factory“
Calibration method „Manual”“
Calibration method „ISO“
Calibration method „Swedish”
Calibration method „Australian”
Calibration method „SSPC“
Calibration method „Rough”
⅓ profile depth or ⅓ profile depth = 10 µm
Offset = 25 µm
Upper limit = 120,0 µm
Lower limit = 80,0 µm
Block size = 5, block statistics being active (block size > 1).
Parameter settings of the selected batch
Date and time of last modification of the selected batch