ElektroPhysik MiniTest 725 Technical Manual And Operating Instructions Download Page 16

Page: 16 / 85

MiniTest 725, MiniTest 735, MiniTest 745

16 / 85

4.2.1 Online Statistics

During acquisition of readings, the measuring screen shows the current statistics of the active

batch in a separate window.

4.2.2 Rotatable Display

In the measuring mode you can rotate the display by 180°.

Press the arrow up/down keys to rotate.

4.4 Menus

The numerous MiniTest features can be accessed via the hierarchic structure of the main menu.

The main menu is subdivided into three submenus: “CAL” (calibration menu), “Menu” (main menu)

and “STAT” (statistics menu). These menus can be accessed via the CAL, Menu and STAT keys.

Press the Function key

to access the main menu.

Use arrow keys to select an item from the menu, e g. „SIDSP“.

Press OK to confirm your selection.

A submenu will open or a function will be called. (e. g. “Print”).

To go back to the previous menu level press ESC.

The parameter and data grouped as grouped under the various menus and submenus may be

divided into three categories:

predefined parameters that may be selected from a list

numerical parameters that may be adjusted within predefined limits

fixed parameters that may only be viewed but not changed

Summary of Contents for MiniTest 725






















































































Search results

Summary of Contents for MiniTest 725

Reviews:

ElektroPhysik MiniTest 725, Technical Manual And Operating Instructions, Page: 16 / 85

Search results

Summary of Contents for MiniTest 725

Reviews: