Edge Scout 320 Manual Download Page 62

Page: 62 / 104

Scout 320 REV 3:2018

F1 Parameter List Accessed without passcode

Parameter NO

Parameter name

Parameter description

Barfeeder Monitor

L01

Finished product length

Use the Bar end position to generate a signal for bar end.

L02

Feed too long safety of
chuck close

Prevents bars from feeding over the length of finished product. To
disable parameter function, please set the value to zero.

L03

Feed too short safety of
chuck close

Prevents bars from feeding length less than finished product. To
disable parameter function, please set the value to zero.

L04

Bar pusher move forward
of chuck open

Under automatic mode, the bar pusher move forward and the
distance is large than the setting value during chuck opened.

L05

Bar pusher backward
safety of chuck open

Under automatic mode, when the bar pusher move backward and
the distance is large than the setting value during chuck opened.

S01

Speed of chuck open

The speed of the bar pusher moves forward under automatic mode
and the chuck is opened.

Q01

Torque of chuck open

The torque of the bar pusher moves forward when the chuck is
opened under automatic mode.

S02

Speed of chuck close

The speed of the bar pusher moves forward under automatic mode
and the lathe chuck is closed.

Q02

Torque of chuck close

The torque of the bar pusher moves forward when the chuck is
closed under automatic mode.

S03

Manual feed speed

The motor turning speed when the bar pusher move forward under
manual mode.

Q03

Torque of manual

The motor torque of the bar pusher moves forward or backward
under manual mode.

P01

Movable anti-vibration
opening position

The position of the movable anti-vibration device opened under
automatic operation.

P02

Movable anti-vibration
second close position

The Second close position of movable anti-vibration device stands
for the position of bar pusher is over the value of parameter,

P01;

the anti-vibration can operate the second close function to clamp bar
pusher.

P19

Chuck facing distance
fine tuning

Fine tuning for chuck facing position as the datum of chuck facing
distance

P10

. If the adjustment quantity is less than 200 or large

than 200, please adjust the value of chuck facing distance

P10

P20

Bar end position fine
tuning

Fine tuning for the bar end position. If the fine tuning quantity is less
than 200 or large than 200, then adjust the parameter

P11

bar end

position value.

P22

Movable anti-vibration
early close position

Under Auto-Mode, Anti-vibration Device will close when bar
pusher reached this parameter setup position.

Summary of Contents for Scout 320









































































































Search results

Summary of Contents for Scout 320

Reviews:

Related manuals for Scout 320

Brands by name

Popular brands

Edge Scout 320, Manual

Search results

Summary of Contents for Scout 320

Reviews:

Related manuals for Scout 320

Brands by name

Popular brands