5
Scout 320 REV 3:2018
2.2 Machine footprint
Caution machine placement is important and proper planning should
be observed. A level floor free from cracks is ideal for anchoring of the
machine. As the customer is the one that decides on machine installation it
is their responsibility to be aware of proper floor requirements.
Placement of the bar feeder is important to gain the use of all the features. It is important to
review the lathe layout to be sure proper clearance exists of the assembly. On some lathes
accessories may prohibit proper placement such as tool changers and transformers. On certain
lathes a “Chucker Mode” option is available. Be sure to place the bar feeder close enough to
supply the reach for the pusher when the lathe is converted to “Chucker Mode” If placed too far
the remnant will be longer than normal. Be advised that too close may allow the bar feeder
telescoping nose to collapse into the head stock when the headstock moves to full negative over
travel.
Lengths
Measurement
L
4599 mm
A (Max. Bar Length)
3800 mm
B
2150 mm
C
584 mm
Weight
420 kg
The image below references ideal spacing for operator movement.
Areas of interest
