48
Scout 320 REV 3:2018
6.3 Basic Movement Functions
Warning proper training is required for bar feeder operators. A lack of
training may lead to personal or machine damage.
Warning be sure lathe is ready for bar feeder operation
( 1 )
Advance / retreat at low-speed
(When the lathe on the left, the motion of
and
are opposite).
Advance at low-speed, press
and
.
Retreat at low-speed, press
and
.
Warning complete understanding of machine operation is required
( 2 ) Automatic work operation
While
and
the light are on, press
and
start to work
automatically. Or while
and
guiding light off, and either
or
is
on, press
and
start to work automatically.
Warning be sure if material is in the bar feeder that lathe tooling is
out of the way of the bar if it moves into the lathe tooling area.
( 3 ) Resetting the Bar Feeder Home Position
When
guide channel up/down light is on move the pusher at least 16 inches
from the home position. Press
and
simultaneously for 3 seconds to
begin resetting the bar feeder home position.
