80
Scout 320 REV 3:2018
Parameter description: Some lathe models will output a lathe door signal to
the bar feeder. When the lathe door is open the bar
feeder will alarm. The input circuit X23 on the PLC
may be changed on how the circuit is monitored by
the PLC as a Normally open or Normally Closed
circuit.
Setting method: Input the desired function character
Previous page
Next page
Home page
3.7XL Generally value:
Setting range:
0~1
Setting value:
Parameter description: Selects different modes for dealing with remnant after
bar changed.
0: Pull back the remnant into the bar feeder.
1: Push out the remnant into the lathe.
2: Push out the remnant into the lathe by a new bar
when bar end signal is sent and bar feeder will
change another new bar.
Setting method: Input the desired function character
Previous page
Next page
Home page
3.7XL Generally value:
Setting range:
0~2
Setting value:
