19
Scout 320 REV 3:2018
4.4 Distance From Lathe
Caution verify proper installation distance or machine crash may
occur.
Verifying the proper install location is critical for complete material utilization and collapsing of
the telescoping nose.
Measurement definitions
•
Distance A is the distance from the face of the collet or chuck on a fixed headstock
machine. On a sliding headstock lathe the distance is 10mm behind the work holding of
the guide bushing.
•
Distance B is from the end of the pusher at home to the end of the bar feeder channel.
•
The max pusher reach is maximum 1270mm
