Eaton Network-M3, User Manual

Page: 190 / 294

Upgrading the card firmware (Web interface / shell script)
Servicing the Network Management Module – 190
1.
2.
Debian/Ubuntu
$ sudo apt-get install sshpass scp
RedHat/Fedora/CentOS
$ sudo dnf install sshpass scp
Make shell script executable:
$ chmod 700 install_updatePackage.sh
4.6.2.2 Procedure
To upgrade the Network module using:
Open a shell terminal on your computer (Linux or cygwin; meaning real or emulated Linux operating system).
Use the shell script
install_updatePackage.sh
Usage: 'install_updatePackage.sh' [options]
Upgrade tool
Mandatory arguments are -f, -i, -u and -p
-h : show help
-f <path> : path of the upgrade file
-u <username> : username of a card user allowed to start upgrade
-p <password> : user password
-i <ipaddress> : ip address of the card to upgrade
-r : reboot the card after upgrade
4.6.3 Example:
$ ./install_updatePackage.sh -u admin -p <mypassword> -f FW_Update.tar -i <cardIpAddress> -r
STARTING UPDATE FROM: [FW_Update.tar] to [X.X.X.X]
Transfer by scp (FW_Update.tar) to [X.X.X.X]
Warning: Permanently added
'X.X.X.X' (ECDSA) to the list of known hosts.
Transfer done.
Check running upgrade status ...
Check firmware binary signature
Uncompress and flash upgrade - inProgress(%):
11
Uncompress and flash upgrade - inProgress(%): 28
Uncompress and flash upgrade - inProgress(%): 44
Uncompress and flash upgrade - inProgress(%): 61
Uncompress and flash upgrade - inProgress(%): 78
Uncompress and flash upgrade - inProgress(%): 92
Uncompress and flash upgrade - inProgress(%): 100
Uncompress and flash upgrade - inProgress(%): 100
Uncompress and flash upgrade
Executing post post_upgrade.sh script upgrade
Upgrade done
Warning: Permanently added
'X.X.X.X' (ECDSA) to the list of known hosts.