Eaton Network-M3, User Manual

Page: 275 / 294

CLI
Information – 275
7.7.8.2 Help
ping
The ping utility uses the ICMP protocol's mandatory ECHO_REQUEST datagram
to elicit an ICMP ECHO_RESPONSE from a host or gateway. ECHO_REQUEST
datagrams (``pings
'' ) have an IP and ICMP header, followed by a ``struct
timeval '' and then an arbitrary number of ``pad '' bytes used to fill out
the packet.
-c Specify the number of echo requests to be sent
-h Specify maximum number of hops
<Hostname or IP> Host name or IP address
ping6
The ping6 utility uses the ICMP protocol's mandatory ECHO_REQUEST datagram
to elicit an ICMP ECHO_RESPONSE from a host or gateway. ECHO_REQUEST
datagrams (``pings
'' ) have an IP and ICMP header, followed by a ``struct
timeval '' and then an arbitrary number of ``pad '' bytes used to fill out
the packet.
-c Specify the number of echo requests to be sent
<IPv6 address> IPv6 address
7.7.8.3 Specifics
7.7.8.4 Access rights per profiles
Administrator Operator Viewer
ping
ping6
7.7.9 reboot
7.7.9.1 Description
Tool to Reboot the card.
7.7.9.2 Help
Usage: reboot [OPTION]
<cr> Reboot the card
--help Display help
--withoutconfirmation Reboot the card without confirmation