Eaton Network-M3, User Manual

Page: 153 / 294

Maintenance
Contextual help of the web interface – 153
•
•
•
•
•
3.9.1.1.1 Card Firmware information
a Status
Uploading
Invalid
Valid
Pending reboot
Active
b Version/Sha
Displays the associated firmware version and associated Sha.
c Generated on
Displays the release date of the firmware.
For better performance, security, and optimized features, Eaton recommends to upgrade the Network Module regularly.
d Installation on
Displays when the firmware was installed in the Network Module.
e Activated on
Displays when the firmware was activated in the Network Module.
3.9.1.1.2 Upgrade the Network Module firmware
During the upgrade process, the Network Module does not monitor the Device status.
To upgrade the firmware:
1. Download the latest firmware version from the website. For more information, see the Servicing the Network Management
Module>>>Accessing to the latest Network Module firmware/driver
section.
2. Click +Upload.
3. Click Choose file and select the firmware package by navigating to the folder where you saved the downloaded firmware.
4. Click Upload. The upload can take up to 5 minutes.
The firmware that was inactive will be erased by this operation.
When an upgrade is in progress, the upload button is disabled, and the progress elements appear below the table with the
following steps:
Transferring > Verifying package > Flashing > Configuring system > Rebooting
A confirmation message displays when the firmware upload is successful, and the Network Module automatically restarts.