Eaton Network-M3, User Manual

Page: 277 / 294

CLI
Information – 277
7.7.11.3 Example
rest get /managers/1/networkService/networkInterfaces/eth1/ipv4/address
=>
10.130.33.195
7.7.12 rest set
7.7.12.1 Usage
rest set <path> <payload>
This command sets the resource identified by <path> with the given <payload>
rest set ?
This command print the help for the command.
7.7.12.2 Example
Set IPv4 address :
rest set /managers/1/networkService/networkInterfaces/eth1/ipv4/settings/manual/address 192.168.47.136
Set a field to an empty value or reset a field :
rest set /managers/1/identification/location ""
7.7.13 rest exec
7.7.13.1 Usage
rest exec <path> [payload]
This command runs the action at the resource identified by <path>. <payload> is an optional argument and is action dependent.
rest exec ?
This command will print the help for the command.
7.7.13.2 Example
Switch On immediately:
rest exec /powerDistributions/1/outlets/1/actions/switchOn
Switch On After 5 second delay:
rest exec /powerDistributions/1/outlets/1/actions/switchOn 5
7.7.14 save_configuration | restore_configuration
7.7.14.1 Description
Save_configuration and restore_configuration are using JSON format to save and restore certain part of the configuration of the
card.
7.7.14.2 Help
save_configuration -h