Eaton Network-M3, User Manual

Page: 146 / 294

Settings
Contextual help of the web interface – 146
•
•
•
•
•
•
•
•
•
existing.
<service_name>: mqtt/syslog/webserver
Examples of usage
From a linux host:
print over SSH: sshpass -p $PASSWORD ssh $USER@$CARD_ADDRESS certificates local print $SERVICE_NAME
revoke over SSH: sshpass -p $PASSWORD ssh $USER@$CARD_ADDRESS certificates local revoke $SERVICE_NAME
export over SSH: sshpass -p $PASSWORD ssh $USER@$CARD_ADDRESS certificates local export $SERVICE_NAME
import over SSH: cat $FILE | sshpass -p $PASSWORD ssh $USER@$CARD_ADDRESS certificates local import
$SERVICE_NAME
csr over SSH: sshpass -p $PASSWORD ssh $USER@$CARD_ADDRESS certificates local csr mqtt
From a Windows host: (plink tools from putty is required)
print over SSH: plink $USER@$CARD_ADDRESS -pw $PASSWORD -batch certificates local print $SERVICE_NAME
revoke over SSH: plink $USER@$CARD_ADDRESS -pw $PASSWORD -batch certificates local revoke $SERVICE_NAME
export over SSH: plink $USER@$CARD_ADDRESS -pw $PASSWORD -batch certificates local export $SERVICE_NAME
import over SSH: type $FILE | plink $USER@$CARD_ADDRESS -pw $PASSWORD -batch certificates local import
$SERVICE_NAME
csr over SSH: plink $USER@$CARD_ADDRESS -pw $PASSWORD -batch certificates local csr mqtt
Where:
$USER is user name (the user shall have administrator profile)
$PASSWORD is the user password
$PASSPHRASE is any passphrase to encrypt/decrypt sensible data.
$CARD_ADDRESS is IP or hostname of the card
$FILE is a certificate file
$SERVICE_NAME is the name one of the following services : mqtt / syslog / webserver.
3.7.9.7.1 For other CLI commands
3.7.9.8 Troubleshooting
Software is not able to communicate with the Network module
Symptoms
In the Network Module, in Contextual help>>>Protection>>>Agent list>>>Agent list table , agent is showing "Lost" as
a status.
In the Network Module, in
Contextual help>>>Settings>>>Certificate>>>Trusted remote certificates , the status of
the Protected applications (MQTT) is showing "Not valid yet".
IPP/IPM shows "The authentication has failed", "The notifications reception encountered error".
See the CLI commands in the Information>>>CLI section.