Eaton Network-M3, User Manual

Page: 17 / 294

Accessing the Network Module
Installing the Network Management Module – 17
•
•
•
•
STEP 7 – The installation is successful when the COM port number is displayed for the Gadget Serial device in the Windows®
Device Manager.
2.5.4.3 Accessing the card through Serial
It is intended mainly for automated configuration of the network and time settings of the network card. It can also be used for
troubleshooting and remote reboot/reset of the network interface in case the web user interface is not accessible.
CLI can be accessed through:
SSH
Serial terminal emulation.
For more details, refer to Information>>>CLI section
2.5.5 Modifying the Proxy exception list
To connect to the Network Module via a USB cable and your system uses a Proxy server to connect to the internet, the proxy
settings can reject the IP address 169.254.0.1.
The 169.254. * Sequence is used to set up communication with devices via a physical connection.
To activate this connection, exceptions will have to be made in the proxy settings.
Open Internet Explorer
Navigate to settings, Internet options;
Changing network parameters may cause the card to become unavailable remotely. If this happens it can only be
reconfigured locally through USB.
You can see this list of available commands by typing in the CLI: ?
You can see the help by typing in the CLI: help