Eaton Network-M3, User Manual

Page: 45 / 294

Controls
Contextual help of the web interface – 45
•
•
•
•
•
3.4 Controls
3.4.1 Entire UPS
Controls are displayed for the entire UPS, and not for specific outlet options.
The table in this section displays UPS status, the associated commands (on/off), and the pending action.
3.4.1.1 Status
Reflects the current mode of the UPS. The following is a list of potential table values that are displayed based on the UPS topology.
On — Protected/Not protected
Off — Not powered/Not protected
3.4.1.2 Commands
A set of commands are available and activated when one of the following buttons is pressed. A confirmation window appears.
Safe OFF
This will shut off the load. Protected applications will be safely powered down.
This control is available only if the status is not OFF and if there are no active commands running.
Safe reboot
This will shut off and then switch ON the load. Protected applications will be safely powered down.
This control is available only if the status is not OFF and if there are no active commands running.
Switch ON
This will switch ON the load or turn ON the online UPS.
This control is available when the status is OFF, if there are no active commands running and if the Online UPS is on bypass.
3.4.1.3 Pending action
Displays the delay before shutdown and delays before startup.