Web Interface Operation
Eaton ePDU G3 Operation Manual P-164000277—Rev 5
98
7.
When you finish modifying Syslog server settings, click
Save
or
Cancel
.
8.
(Optional). Click
Test
to test the configuration.
Access Accounts
Configure the SuperUser
1.
Access the Web interface and log in.
2.
Under Settings, select Access Accounts. The Access Accounts page displays.
3.
In the Admin Access panel, perform the following:
l
Type the SuperUser login.
l
Type the SuperUser password.
l
Type the SuperUser password again.
4.
Click
Save
.
Configure the E-mail Notification Settings
1.
Access the Web interface and log in.
2.
Under Settings, select Access Accounts. The Access Accounts page displays.
3.
In the Admin Access panel, click the e-mail address link.
4.
The e-mail recipient address displays. If needed, change the address.
5.
If needed, type the descriptive text to identify the e-mail receiver.
6.
Enable or disable the e-mail receiver in the status drop-down list.
7.
Check the Attached Files check box to attach the event log file to the e-mail sent to this receiver, or
uncheck the box to send the e-mail without the event log file.
8.
Select the date of the next report using the date picker or manually enter the date in mm/dd/yyyy format.
9.
Set the frequency of the report if this recipient should receive regular reports.
10. Set the time of delivery using the drop-down list.
11. From the On Event drop down list, select one of the following:
l
Disable
: E-mail delivery is disabled and the
Test
button is deactivated.
l
All Alarms
: E-mail is enabled and the
Test
button is activated.
12. Click
Test
to send a test e-mail.
13. Otherwise, click
Save
or
Cancel
.
Configure the LCD Password
NOTE 1
By default, an e-mail address is attached to each account.
NOTE 2
Any user can change his own e-mail address.
NOTE 1
Only an administrator can activate, deactivate, or modify the LCD password.
NOTE 2
There can only be one LCD password on the ePDU.