Serial Interface Operation
Eaton ePDU G3 Operation Manual P-164000277—Rev 5
78
pdu command
Use this command to access different ePDUs on the daisy chain, or to reset a daisy-chained ePDU as the Host
or Device.
Usage
pdu#0>pdu <value>
where:
<value> = 0 for the host; 1, 2, 3, 4, 5, 6, or 7 for the device
Example
pdu#0>pdu 1
pdu#1>
Error Messages
The following errors could display:
The command is unknown.
This error displays when an invalid command is entered. Valid commands are ?, info, get, set, pdu, and quit.
The parameter in the command is unknown.
This error displays when a parameter you entered in the command is not recognized.
The parameter in the command is out of limits.
This error displays in the following circumstances:
- The set command refers to a data name but does not have the second parameter.
- The set command refers to a value that does not match with the data.
The command is not valid for this object.
This error displays when the set command refers to an object that cannot be set after the system preforms a
coherence check with other data.
The user has insufficient rights
.
This error displays when:
- The set command contains read-only data.
- The user has insufficient rights to modify the data.
The PDU1 is not available.
This error displays when the indicated PDU is unreachable.
XML Object Tables
XML object tables are available online at www.eaton.com/ePDU.