Eaton easyE, Manual, Page: 98 / 111

9. Faults
9.1 Resetting the device to factory settings - Factory Settings
9.1 Resetting the device to factory settings - Factory Settings
The easyE Remote Touch Display can be reset to its factory settings (in the event that
you lost your password, for example).
Resetting the device to factory settings will reset the following:
l
All network settings
(RTD IP address; IP addresses and names of the easyE4 devices)
l
All display settings
l
All security settings (auto logout, USB connection)
l
All passwords set on the RTD
The visualization project file for the easyE RTD Advanced will be
deleted.
To reset the device to factory settings, you will need to press the CTRL button.
1. Turn the device on.
24 V
ON !
2. When the screen shows the system booting up, press and hold down the
CTRL button for about 5 seconds.
B o r d...
S N . ..
B o o tloader...
6 0 5
1 0
3 0
1 5
2 0
2 5 3 5
4 0
4 5
5 0
5 5
5 s e c .
When you reset the easyE Remote Touch Display back to factory settings, it will
restart several times.
Once it is done, the original factory settings will be available again.
98
easyE Remote Touch Display 01/24 MN048027EN Eaton.com