Eaton easyE, Manual, Page: 87 / 111

7. Operation
7.2 Device menus
After the import is completed, a message to this effect will appear on the RTD.
Select the Import page.
Select the file you want from the list of available *.rtd files on the USB storage
device.
Press the Import button.
As soon as the visualization project file parts have been loaded in the easyE RTD
Advanced, the corresponding settings will be applied and a message will be shown.
Export
/
Fig. 48: Export configuration
Plug a USB drive into the USB port.
Select the page for export.
Enter a filename.
Select a name that you want to be shown in the selection list in the
event that you re-import the filename.
Tap the Export button to start exporting the configuration.
Once the *.rtd file is exported successfully, a message to this effect will appear on
the display.
easyE Remote Touch Display 01/24 MN048027EN Eaton.com
87