Eaton easyE, Manual, Page: 69 / 111

7. Operation
7.2 Device menus
Unmount button
Tapping the button will complete all pending read and write operations and will
safely unmount the filesystem.
To export the logs:
Plug a USB drive into the RTD's USB port.
Select the logs you want by enabling the corresponding checkboxes: .
Tap Export to start exporting the logs you selected.
Tap to exit the menu page.
Legal information button
This menu lists all the open-source licenses used.
/ /Legal information
Fig. 21: Open-source licenses used
To scroll, move through the page by sliding your finger along the right edge
Tap to exit the menu page.
Factory reset button
After confirming the security prompt, the RTD settings will be reset as follows:
1. All settings and passwords will be reset.
2. The firmware version will be restored to the next-to-last update.
You will need to update to the latest firmware version again.
The visualization project will be deleted when this happens.
Reboot device button
Tapping this button will restart the RTD.
None of the user groups will be logged in.
easyE Remote Touch Display 01/24 MN048027EN Eaton.com
69