Eaton easyE, Manual, Page: 62 / 111

6. Running the RTD
6.1 Visualization
Store the visualization project file from easySoft on a USB flash drive.
Insert the USB storage device into the EASY-RTD-DC-43-03B2-00 USB port.
The USB port will be disabled by default. It can be enabled while setting up the RTD
with the Setup Wizard or in the Import / Export configuration page menu (the Security
menu is where it is specifically enabled).
Open the Import / Export menu.
Select the Import page.
Select the file you want from the list of available *.rtd files on the USB storage
device.
Press the Import button.
As soon as the visualization project file parts have been loaded in the easyE RTD
Advanced, the corresponding settings will be applied and a message will be shown.
62
easyE Remote Touch Display 01/24 MN048027EN Eaton.com