Eaton easyE, Manual, Page: 77 / 111

7. Operation
7.2 Device menus
/
Fig. 29: Display
Page 1 Brightness Tap the slider to adjust
Page 2 Brightness when
dimmed
Tap the slider to adjust
As soon as a time has been entered and enabled for Display Timeout, the
display will be dimmed to the value configured here once the configured
time elapses.
You can have the display be turned off with the off setting
In addition, you can disable dimming with the max setting
Page 3 Display Timeout Used to set a time
after which the display will be automatically turned off in order to save
electricity if there is no user activity
The function will be disabled by default, the display will always be on.
Enable – Slider The timeout setting will be enabled
Page 4 easyE4 monochrome mode You can configure font and background colors for the text display function
blocks (D) in easySoft. These colors will then be used on the web server
and the RTD.
To disable this color setting and use a black-and-white configuration like
the one on the easyE4 device display instead, you can use monochrome
mode.
If you do this, the base device's selectable backlight (white/red/green) will
also be mirrored on the RTD.
Enable – The easyE4's background color will be kept monochrome in order
to make it easier to see LED colors.
easyE Remote Touch Display 01/24 MN048027EN Eaton.com
77