Eaton easyE, Manual, Page: 89 / 111

8. Connecting to the RTD
8.1 easyE4 with the RTD
8. Connecting to the RTD
8.1 easyE4 with the RTD
Prerequisites
l
A standard RJ45 Ethernet cable, not included.
l
User permissions for the RTD
l
Remote control permissions set up on the
easyE4.
l
Existing separate power supply for:
l
easyE4
l
RTD
Standard: Auto IP
1. Establish a physical connection between the easyE4 and the RTD with an Ethernet
cable with RJ45 connectors.
2. Open the easyE4 mirroring menu
3. Search for and select the easyE4 (it may already have been pre-selected in the
Setup Wizard configuration)
4. Set as default configuration
easyE4 provides an auto IP functionality for the connection
The easyE4 control relay and the RTD both feature the Auto IP functionality.
8.1.1 Steps for establishing a connection
1. Establish a physical connection between the easyE4 and the RTD with an Eth-
ernet cable with RJ45 connectors.
DEL
ALT
ESC
OK
Fig. 49: Ethernet connection using the ports on the RTD and easyE4
2. Power the devices
3.
Log in to the RTD
4. Open the
easyE4 mirroring menu (formerly Remote easyE4)
easyE Remote Touch Display 01/24 MN048027EN Eaton.com
89