Eaton easyE, Manual, Page: 91 / 111

8. Connecting to the RTD
8.1 easyE4 with the RTD
/
Fig. 53: easyE4 mirroring
The content of the easyE4 display and its controls will be automatically duplic-
ated on the RTD.
The easyE4 can be controlled from this view, provided that remote display
access permissions are configured correctly in the easyE4. → "Remote Display
-access inhibit", page 92
In addition, you can tap and hold the display to switch between the view with
control buttons and full screen mode.
If you tap and hold 3 seconds on the gray background around the
control buttons, a popup with the list of favorites will appear. You
can use this to quickly switch between various easyE4 devices
without having to go through the
easyE4 mirroring menu every
time.
8. Set it as the default configuration or store it in the list of favorites
so that you will not have to run a search again when establishing this con-
nection.
/
Fig. 54: easyE4 mirroring
You can also enter the IP address directly in the input fields with the arrow buttons or
the input assistance. After doing this, tap the Connect button to establish the con-
nection.
easyE Remote Touch Display 01/24 MN048027EN Eaton.com
91