Eaton easyE, Manual, Page: 75 / 111

7. Operation
7.2 Device menus
7.2.5 Network menu
This menu shows network settings and can be used to configure the RTD for the net-
work.
/
Fig. 27: Network
Page 1 Display of IP Address
Subnet Mask
IP Assignment
Page 2 Display of MAC
Gateway
DNS – not active, no web browser application
Page 3 Modus
IP address
The following are available:
l
Static
l
Auto IP
l
DHCP
DHCP will only be available if a router is detected on the network.
Page 4 IP address
(available only if IP address:
Static)
To enter:
Tap one of the number groups until the input assistance opens
or
use the arrow buttons above and below the number groups to change the
value.
Page 5 SubnetMask
(available only if IP address:
Static)
To enter:
Tap one of the number groups until the input assistance opens
or
use the arrow buttons above and below the number groups to change the
value.
Page 6 Gateway To enter:
Tap one of the number groups until the input assistance opens
or
use the arrow buttons above and below the number groups to change the
easyE Remote Touch Display 01/24 MN048027EN Eaton.com
75