Eaton easyE, Manual, Page: 27 / 111

2. Safety regulations
2.1 Basics
2. Safety regulations
2.1 Basics
The device has been designed according to the state of the art and all generally
accepted safety rules and standards. However, this alone cannot eliminate all poten-
tial hazards, which is why it is necessary for you to be aware of all hazards and resi-
dual risks.
Do not run the device unless it is in perfect technical condition. Make sure to always
operate it as specified in this document and for the intended purpose.
Follow the safety instructions for the easyE RTD!
The section on safety instructions must be read and understood by
everyone who will be working with the RTD before the actual work is
performed RTD.
CAUTION
Pay attention to the hazard severity levels used throughout this docu-
mentation whenever a hazard is indicated. The hazard symbol and
signal word used and the corresponding text will provide information
regarding the specific hazard and how to avoid or prevent it.
2.2 Mandatory requirements, personnel requirements
2.2.1 Occupational safety
All generally accepted occupational health and safety rules and standards (internal
and national) must be complied with, as must be all applicable laws and regulations
in the relevant country.
2.2.2 Personnel qualifications
The personnel responsible for installation, operation, maintenance, and repairs must
have the necessary qualifications for the work they will be performing. They must be
appropriately trained and/or briefed and be informed of all hazards and risks asso-
ciated with the device.
easyE Remote Touch Display 01/24 MN048027EN Eaton.com
27