Eaton easyE, Manual, Page: 70 / 111

7. Operation
7.2 Device menus
7.2.3 easyE4 mirroring menu (formerly Remote easyE4)
The connection to the easyE4 can be established in this menu.
The blocks for entering and showing IP addresses are available here.
/
Fig. 22: easyE4 mirroring
You can enter the IP address in blocks using the arrow buttons.
If you tap and hold a field, an input field will appear.
Set the connection as the default so that a connection will be established directly to
this easyE4 with the next access operation.
Search button
Tapping this button will start the search for easyE4 devices.
Buttons in the Search window
Tapping the SEL button will select the IP address that is currently high-
lighted in the list and exit the page. The selected IP address will then
be found in the address field.
Tapping and holding a list entry will have the same effect as the SEL
button.
/
Fig. 23: easyE4 mirroring/Search
70
easyE Remote Touch Display 01/24 MN048027EN Eaton.com