Eaton easyE, Manual, Page: 101 / 111

10. Maintenance
10.3 Storage, transport and disposal
10.3 Storage, transport and disposal
10.3.1 Storage and transport
CAUTION
UV LIGHT
Plastics will become brittle when exposed to UV light. This artificial
aging will reduce the RTD unit's lifespan.
Protect the Resistive Touch Display unit from direct sunlight and
other sources of UV radiation.
CAUTION
SHORT-CIRCUIT HAZARD
If the Resistive Touch Display is or has been exposed to envir-
onmental fluctuations (ambient temperature, air humidity), con-
densation may form on or inside RTD. As long as this condensation is
present, there will be a short-circuit hazard.
Do not switch on the device when it has condensation in or on it.
If the Resistive Touch Display has condensation in or on it, or if it has
been exposed to environmental fluctuations, let the RTD settle into
the existing ambient temperature before switching it on. Do not
expose the device to direct thermal radiation from heating appli-
ances.
The ambient conditions must be met when transporting and storing the RTD.
The ambient air temperature for storage and transportation must not exceed the max-
imum specified limit of: -20 – + 60 °C (-4 – +140 °F).
CAUTION
SHORT-CIRCUIT HAZARD
If the Resistive Touch Display is or has been exposed to envir-
onmental fluctuations (ambient temperature, air humidity), con-
densation may form on or inside RTD. As long as this condensation is
present, there will be a short-circuit hazard.
Do not switch on the device when it has condensation in or on it.
If the Resistive Touch Display has condensation in or on it, or if it has
been exposed to environmental fluctuations, let the RTD settle into
the existing ambient temperature before switching it on. Do not
expose the device to direct thermal radiation from heating appli-
ances.
easyE Remote Touch Display 01/24 MN048027EN Eaton.com
101