Eaton easyE, Manual, Page: 102 / 111

10. Maintenance
10.3 Storage, transport and disposal
Before commissioning
If storing/transporting the device in cold weather conditions or in
such a way that it will be exposed to extreme differences in tem-
perature, make sure that no condensation forms on or inside the
device.
If there is condensation in or on the device, do not switch on the
device until it is completely dry.
Use the original packaging to ship the device.
The device should only be transported in its original packaging after
being packed properly.
The Resistive Touch Display is sturdily built, but the components inside it are sens-
itive to excessively strong vibrations and/or mechanical shock.
Accordingly, make sure to protect the RTD from mechanical loads that exceed the
scope of the unit's intended use.
10.3.2 Disposal
Dispose of recyclables as required by your local recycling regulations.
Dispose of recyclables as required by your local recycling reg-
ulations.
RTD devices no longer being used must be professionally disposed or returned to the
manufacturer or relevant sales department.
Dispose of the RTD unit professionally.
Assembly part Material
Display Standard front with standard membrane (fully enclosed)
Back of the housing
Display Plastic
Insulated material, black
Tab. 12: Materials used RTD
Packaging Material
Outer packaging Cardboard
Inner packaging Closed cell polyethylene foam, free of CFCs / plastic bag: poly-
ethylene (PE)
Inner packaging RTD Cardboard; plastic film and bag: Polyethylene (PE)
Tab. 13: Materials used in the packaging
102
easyE Remote Touch Display 01/24 MN048027EN Eaton.com