Eaton easyE, Manual, Page: 57 / 111

5. Commissioning
5.2 Initial commissioning
5.2 Initial commissioning
During initial commissioning, as well as after resetting the device to factory settings,
you will need to define the passwords for three types of user:
l
Watch,
l
Operate
l
Administrate
Please note that the RTD cannot be used until these user group passwords have
been defined.
Define the passwords for each user group in order to protect your
device.
For more instructions, please refer to the "Operation" section → page 63
5.2.1 Setting passwords
The password must be made up of exactly six characters (uppercase letters and num-
bers only), and you will need to enter it again for confirmation.
Tap the input field.
The keyboard will appear.
Enter the password for Watch password.
Confirm by tapping the button.
Enter the password again to confirm it
Confirm by tapping the button.
Repeat the steps above for the Operate password
Repeat the steps above for the Administrate password
After you set up the passwords, the Device information menu will appear. None
of the user groups will be logged in at this point.
easyE Remote Touch Display 01/24 MN048027EN Eaton.com
57