Eaton Cutler-Hammer FP-5000, Instruction Leaflet

Page: 73 / 213

IL17569C
Page 5-18
FP-5000
Effective Date: 12/05
Page 5-18 For more information visit: www.eatonelectrical.com Effective Date: 12/05
Display Setting Description Setpoint Range/
Value Selection
Default
Setting
Selected
Value
Refer to
Sec. #
Current Demand Current Demand Logging Setting
Interval (m): Select interval for taking current
demand measurement in minutes
1 to 60 minutes
(Increments of 1)
15
Power Demand Power Demand Logging Setting
Window: Select type of power demand
window
Fixed or Slide Fixed
Interval (m): Select interval for taking power
demand measurement in minutes
1 to 60 minutes
(Increments of 1)
15
Event Log Enable Even Log Settings for Pickups,
Contact Inputs and
I Pickup: Select I Pickup to be logged No, Yes Yes
V Pickup: Select V Pickup to be logged No, Yes No
Freq Pickup Select Freq Pickup to be logged No, Yes No
PF Pickup: Select PF Pickup to be logged No, Yes No
Unbal Pickup: Select Unbal Pickup to be logged No, Yes No
SysAlm Pickup: Select system alarm pickup to be
logged
No, Yes No
Power Pickup: Select power pickup to be logged No, Yes No
Logic Pickup: Select logic pickup to be logged No, Yes No
Cin1: Set Cin1 event to be logged No, Yes No
Cin2: Set Cin2 event to be logged No, Yes No
Cin3: Set Cin3 event to be logged No, Yes No
Cin4: Set Cin4 event to be logged No, Yes No
Cin5: Set Cin5 event to be logged No, Yes No
Cin6: Set Cin6 event to be logged No, Yes No
Cin7: Set Cin7 event to be logged No, Yes No
Cin8: Set Cin8 event to be logged No, Yes No
Comm.: Set Comm event to be logged No, Yes No
5.5.4
5.5.4
5.5.4
12.2.1
Logging Settings:
Phase time overcurrent (51P) and instantanious (50P-1 & 50P-2) device settings
Table 5.4 Logging Settings