88
4.
ARROW KEYS
– These keys are used to navigate through the
menus, make menu selections, move the map cursor and sonar chart
cursor and enter data.
5.
ENT
– The Enter key allows you to save data, accept values or exe-
cute menu commands. It is also used to create event marker icons.
6.
EXIT
– The Exit key lets you return to the previous screen, clear
data or close a menu.
7.
WPT
– The Waypoint key is used to save and recall waypoints,
search for waypoints and access the waypoint list. It's also involved in
some navigation functions.
8.
ZOUT
(Zoom Out) – This key lets you zoom out the screen. On the
Sonar Page, it will allow you to see the full sonar chart display, show-
ing the entire water column from surface to bottom. On the Full Map
display, this lets you see a larger geographic area on the display. Less
detail is seen as you zoom out.
9.
ZIN
(Zoom In) – This key lets you zoom in the screen. On the Sonar
Page, it enlarges fish signals and bottom detail. On the Full Map dis-
play, zooming in lets you see greater detail in a smaller geographic area
on the display.
Power/lights on and off
To turn on the unit, press
PWR
. When the unit is powered up, the Full
Map GPS Page will be displayed. To switch between Sonar and Map
page options, press
PAGES
|
←
→
. To select a page, press
↓
↑
to the
Page
Name
|
ENT
.
To turn on the backlight, press
PWR
again. The unit has four backlight
levels to select from. Repeatedly pressing
PWR
will cycle through the
backlight settings and turn off the backlight.
Turn off the unit by pressing and holding the
PWR
key for 3 seconds.
Summary of Contents for Cada 250 S/Map
Page 20: ...12 Notes ...
Page 138: ...130 Notes ...
