manualshive.com logo in svg

Eagle Cada 250 S/Map, Installation And Operation Instructions Manual

Get the comprehensive installation and operation instructions manual for the Eagle Cada 250 S/Map, absolutely free! This manual provides step-by-step guidance to set up and operate your device efficiently. Visit manualshive.com to easily download this essential manual and unlock the full potential of your Eagle Cada 250 S/Map.

Share
Download
background image

148

Pop-up Help

Help is available for most all menu items in this unit. By leaving a
menu item highlighted for a few seconds, a pop-up message appears
that describes its function. This feature is on by default.

To set up Popup Help:

 Press 

MENU

|

MENU

|

↓

 to 

S

YSTEM 

S

ETUP

|

ENT

|

↓

to 

P

OPUP 

H

ELP

. With the option highlighted, press 

ENT 

to turn it on

(check) and turn it off (uncheck). After the option is set, press 

EXIT

|

EXIT

to return to the main page display.

    

System Setup Menu (left) with Pop-up Help highlighted. The

 Pop-up Help message for the Sensitivity command (right).

Reset Options

To reset all features to factory defaults:

Press 

MENU

|

MENU

|

↓

 to 

S

YSTEM 

S

ETUP

|

ENT

|

↓

 to 

R

ESET 

O

PTIONS

|

ENT

|

←

 to

Y

ES

|

ENT

.

NOTE:

Reset Options does 

not

 erase any waypoints, routes, icons, plot trails or

sonar logs.

Summary of Contents for Cada 250 S/Map













































































































































































Reviews:

No comments

Related manuals for Cada 250 S/Map

Brands by name

Popular brands

Load more brands