DYNISCO UPR800 Series Instruction Manual
Page | 75
Range: 50,
60,
und.60
50, 60: when the device is able to detect correctly 50 or 60 Hz line
frequency. und.60: automatic detection of the line frequency doesn’t
work (e.g. 24V DC power supply); a 60 Hz rejection is assumed.
Default value:
Not applicable.
LOADING DEFAULT DATA - Group 4
Available:
Only if access to level C is allowed
Upper display:
OFF
Lower display:
DEFLT
Range:
Use
u t
keys to switch the upper display from OFF to On 4, then
press FUNC key to load the default data of the parameters belonging
to group 1, group 2, group 3 and group 4
12.5 Group 5 Parameters
PRIMARY INPUT SELECTION - Group 5
Available:
Always
Upper display:
Type of primary input selection
Lower display:
PI.TYP
Range:
Str, 0-20, 4-20, 0-5, 0-10. Strain gage, 0-20mA, 4-20mA, 0-5V, 0-10V
Default value:
Strain gage
Note:
Proper terminal block wiring required
SECONDARY INPUT SELECTION - Group 5
Available:
Only is secondary input circuit is fitted
Upper display:
Type of secondary input selection
Lower display:
SI.TYP
Range:
OFF, tc, rtd, 0-20, 4-20, 0-10. Disabled thermocouple, RTD, 0-20
mA, 4-20mA, 0-10V
Default value:
Thermocouple
Note:
Proper terminal block wiring required
SECONDARY INPUT FUNCTION - Group 5
Available:
Only if SI.TYP is different from OFF.
Alterable:
Only if SI.TYP is equal to 0-20, 4-20, 0-5, 0-10; otherwise it is forced
according to the SI.TYP value.
Upper display:
Function of secondary input.
Lower display:
SI.FNC
Range:
tenp, diff.P., where tenp input acts as a temperature input and diff.P
input acts as the second sensor for differential pressure
measurement
Default value:
tenp.
MAIN ANALOG OUTPUT SELECTION - Group 5
Available:
Always
Upper display:
Type of main analog output selection
Lower display:
MO.TYP
